Advertisement
Model:
T-49PT
STANDARD FEATURES
DESIGN
• True's commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder
product temperatures, lower utility costs,
exceptional food safety and the best value in
today's food service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains 33°F to 38°F (.5°C to
3.3°C) for the best in food preservation.
• Sealed, cast iron, self-lubricating evaporator
fan motors and larger fan blades give True
reach-in's a more effi cient low velocity,
high volume airfl ow design. This unique
design insures faster temperature recovery
and shorter run times in the busiest of food
service environments.
• Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most grease
free area of the kitchen. Allows for storage
area on top of unit.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front and
back. Anodized quality aluminum exterior
ends, and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless fl oor
with coved corners.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using high
density, CFC free, polyurethane insulation.
PLAN VIEW
83
/
5
16
(2117 mm)
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
T Series:
Pass-Thru Solid Door Refrigerator
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 4" (102 mm) diameter
stem castors - locks provided on front set.
DOORS
• 300 series stainless steel exterior with white
aluminum liners to match cabinet interior.
Doors extend full width of cabinet shell.
Door locks standard.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Lifetime guaranteed recessed door handles.
Each door fi tted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to insure permanent
attachment.
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
• Six (6) adjustable, heavy duty PVC coated
wire shelves 24
569 mm). Four (4) chrome plated shelf clips
included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker switch
mounted above doors.
"
54
1
/
8
(1375 mm)
"
78
/
5
16
(1990 mm)
"
ELEVATION
"
5
(127 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
9
3
/
"W x 22
/
"D (624 mm x
16
8
1
/
" (13 mm) increments.
2
"
76
15
/
16
(1955 mm)
"
PLAN VIEW
1
3
/
8
(35 mm)
Model
KCL
T-49PT
MODEL FEATURES
• Exterior mounted temperature monitor.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and
plug set included.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
❒ Alternate door hinging (factory installed).
❒ Additional shelves.
❒ Half door bun tray racks. Each holds up
to eleven 18"L x 26"D (458 mm x 661 mm)
sheet pans (sold separately).
❒ Full door bun tray racks. Each holds up to
twenty-two 18"L x 26"D (458 mm x
661 mm) sheet pans (sold separately).
❒ Remote cabinets (condensing units supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant). Consult factory technical service
deptartment for BTU information.
"
83
/
3
16
"
32
1
/
8
(2113 mm)
(816 mm)
"
57
21
/
32
(1313 mm)
"
25
/
17
32
(649 mm)
Elevation
Right
Plan
TFEY02E
TFEY23S
TFEY23P
3D
TFEY233
Advertisement
