Advertisement
tr
Use the remote control to release the shutter from up
to 5 m (16.4 ft.) in front of the camera.
Remote Control (RC-s)
Replacing the Remote Control Battery
Replace the battery when the remote control will no
longer release the shutter.
Battery: One CR 2Og2 gV lithium battery
4
Pull out the battery
I
holder.
. Use a pen or other pointed
implement to push in the
release button as you slide
the battery holder out.
Load a new battery into
the holder and fit the
holder back into the
remote control.
. Ensure that the + and -
terminals are positioned
correctlv.
Set the camera to
Remote Control mode.
. Press the lro
rJ button.
I
The rrc
tt
icon appears
on the LCD oanel.
. lf you press the lrrr
N)
button again, the rrr- g
disappears and Remote
Control mode is cancelled.
1
Take the picture.
. Lock the focus and then
compose your shot Then
ooint the remote control
transmitter towards the
sensor on the camera and
oress the transmitter button.
I
The red-eye reduction lamP
blinks once a second (or
remains lit when red-eYe
reduction is used) and a
countdown is displayed on
the LCD oanel to show that
the camera has received the
signal from the remote
control.
+ The shutter is released
approximately 2 seconds
later.
()
. Remote control photography
may not be [oisible if
the remote control sensor on the camera is exposed
to sunlight or strong fluorescent light. ln such
situations, use the self-timer to tale the picture, or
move the camera to another location.
. The camera's remote control
function mav not
operate correcfly if the camera is close to a
fluorescent light during signal reception. lf this occurs,
move the camera away from the fluorescent light.
El-zt
iN)
Sensor
El-:o
Advertisement
