Table of Contents
Advertisement
6
Troubleshooting
Symptom
Cause
Action
Page
The shutter can
not be
released.
The camera power is off.
Turn the camera power on.
14
The battery warning is blinking.
Replace with fresh battery.
12
The battery is incorrectly loaded.
Load the battery correctly.
12
The camera is set to remote control / self timer mode.
Reset to another mode.
No indication
in the display
panel.
The camera power is off.
Turn the camera power on.
14
The battery warning is blinking.
Replace with fresh battery.
12
The battery is incorrectly loaded.
Load the battery correctly,
12
The Green LED
Is blinking.
The camera is too close to the subject.
Follow the minimum distance
requirements.
18
The flash is charging.
Wait till the Green LED goes out.
16
The object is out of focus.
Aim the focus frame at different
subject with the same distance,
then use the focus lock function.
18
The flash fires
when the shutter is
pressed halfway.
In low light conditions without enough ambient light to
focus, normally the flash will fire for assisting AF by
pressing the shutter halfway down.
Push the shutter button
completely down to release the
shutter.
16
The flash does
not fire.
The camera is set to flash-off mode.
Reset to another mode.
21
The camera is set to landscape mode.
Reset to another mode.
22
The camera is set to exposure compensation mode.
Reset to another mode.
26
32
Advertisement
Table of Contents
