Advertisement
TIMER
With the 24-hour timer, you can set the unit to operate continuously, or to operate
so it automatically switches the unit on and off at the desired time.
To operate the heater in timed mode, the three position switch within the dial should
be in the centre position. If it is in the "I" position, the heater will be permanently
ON. If it is in the "O" position, the heater will be permanently off.
The numbers around the timer dial show the time as a 24-hour clock. The timer is
controlled by plastic segments; each segment represents 15 minutes.
Move the segment outwards if the heater should be ON for that period, or inwards
towards the centre of the dial if it should be OFF.
Rotate the dial clockwise until the arrowhead at the right of the dial points to the
current time.
To use the heater in timed mode, it should be permanently connected to the mains
supply. if the power is disconnected, the clock will stop.
4
Advertisement
