Sound Mute - Sanyo 14MT1 Instruction Manual

ee © o>
«4SOUND MUTE
HL
@ Sound Mute
Should you wish to mute the sound (Eg. while talking
on the telephone), press the 4K button once. To
switch the sound back on, press it again.
MEMORY
o-- > eee
oc
NORMAL
---><---
Mm Memory
Present Sound volume, Colour, Brightness, and
Contrast can be set into the memory by pressing the
©/PT button. This must be done while the Function
on screen display is still on the screen, (approx 5
seconds).
M@ Normalisation
Press the >*< button to recall the picture and sound
settings stored in the memory.
a
You can select a playback from the AV terminal by
pressing the TV/&) button and the mode changes as
illustrated.
When the programme number is entered in the AV
mode, the TV set switches to the entered programme
position directly.
@ AV Input mode Selection
The input signal from the AV equipment which is
connected to the 21 pin terminal is selected by
pressing the ©/PT button in the AV mode.
Each time the /PT button is pressed, the input
mode change as follows:
AV: Video input mode
AV S-VIDEO: S-Video input mode*
AV RGB: RGB input mode
SANYO Operating Instruction Manual 9