Setting Procedure - Sanyo 14MT1 Instruction Manual

SET 4 +44 -
SET 4+ 4-
CLOCK--:--
12 SANYO Operating Instruction Manual
This TV has a clock function which can be
displayed on the screen, to switch on the TV set at a
desired time and to switch off into standby mode
after a preset period of time.
;
To select the different clock functions, press the
@ Button, each time it is pressed the display changes as
follows.
@ Sleep timer display/setting mode
@ Clock display/setting mode
@ On-timer display/setting mode
@ No time display on the screen
This TV set will automatically set the clock by using the
teletext service. Therefore, you do not need to set the
clock time.
The clock setting is performed when turning on with the
mains switch and selecting a programme position with
teletext.
SETTING PROCEDURE
For example: Set clock at PM 6:25.
Press the @ button twice to select the clock
display/setting mode.
Set hours "18"(24 hours clock) by pressing the —#-+
button. It changes as follows:
00->01-+02------22->23->00----
Set minutes "25" by pressing the ——«/ button. It
changes as follows:
00->01-02-------58->59->00->01----
Note: The clock timer starts after releasing the — -.-/7
button.