Operations; Control Panel - Samsung WD75K6 Series User Manual

Operations

Control panel

01 Course Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Dry Level
07 Bubble Soak
WD85(75)K6410OS_03745F-02_EN.indd 31
Turn the dial to select a course.
The display shows current course information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current course.
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5.
Press to change the spinning speed for the current course.
• Rinse Hold (No indicator): The final rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
• No Spin : The drum does not spin after the final drain cycle.
• Spin Only : To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
Press this button to select proper drying option.
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
02
03 04 05 06
11
09
10
08
07
English 31
2017/2/16 16:08:59