Panasonic RX-DT505 Service Manual page 14

RX-DT505
Procedure Procedure
1-2—5—-6— 1—-2—5-—6—
11— 26—27—28— 11> 26— 27— 28-—
29-30-31 29> 30->31—32
Lever
Remove the lever @ by keeping the lever © pressed
in the direction of arrow.
Removal of the Lever ©
Procedure
1—2— 5 6—
11 26—> 27 28—
29— 30> 32-533
2. Release the claw in the direction of arrow.
Remove the lever © in the direction of arrow @ by keeping
the claw pressed in the direction of arrow @.
Procedure
152—5-—-6—>
11— 26— 27— 28—
29—>30—31—32—
33— 34
®Slide the lever © fully in the direction of arrow and pull out
the lever ©).
Removal of the Loading Motor and
Loading switch
Procedure
1 2—5—6—
11+ 26-27-35
Loading motor P.C.B.
3. Remove the screw (@) and
1. Remove the belt.
remove the loading motor.
2. Remove 2 screws
(@. @).
4. Resolder the 2 solders
@®.
Remove the loading
motor.
5. Resolder the solder B
and release 4 claws in
the direction of arrow.
Remove the loading
—~16—