Dishware Drying; Unloading The Dishwasher - Sears Kenmore ELITE 630.1630 Series Use & Care Manual

Using your Dishwasher..continued
F. Dishware Drying
At the end of the cycle the dishwasher will stop and a period of
condensation drying will follow (more information on
Condensation Drying can be found in the Features,
Accessories, and Options section of this manual.). After 12 - 15
minutes of drying,
= the LED display will show "0",
= the "Sanitized" indicator will light (except in the
Quick Wash and Rinse cycles).
G. Additional Drying Heat
With this option you can raise the temperature of the rinse
water, which will result in better and faster drying.
a) Press and hold the left "Cancel Drain" button as shown in
Figure 27, then press and hold the On/Off button.
27
When the LED display shows a "0" or a "1", release both
buttons.
b) To enable the Additional Drying Heat, press the left "Cancel
Drain" button until the LED display shows a "1".
c) To disable the Additional Drying Heat, press the left "Cancel
Drain" button until the LED display shows a "0".
d) Press the On/Off button. You may now wash dishes as
usual.
H. Unloading the Dishwasher
1. General Guidelines
.........
POSSIBLE BURN INJURY: Dishware is hot
immediately after the wash cycle. Do not handle
dishware immediately after the wash cycle.
a) Unload the bottom rack first.
b) Unload the silverware basket(s).
c) Unload the top rack.
d) If the Extra Tall Item Sprinkler was installed, return the
dishwasher to its normal condition (see the Loading Extra
Tall Items instructions in the "Loading the Dishwasher"
section of this manual).
Dishware Drying Unloading the Dishwasher 1 1