Advertisement
5.1.
BASE & WHEELS (FIG.1)
Press the 2pcs front wheels into the base position, and screw the 2pcs rear wheels.
5.2.
DETERGENT TANK (FIG.2)
Fit the detergent tank on the base, with the humps into the slots. Press the detergent tank onto the stainless steel one, and buckle it.
5.3.
FILTERS (FIG.3, 4, 5 & 6)
Fit the HEPA filter according to fig.3. Insert the water valve unit into the head unit, and turn it clockwise to lock (fig.4). Before cleaning
dry dust, lock the dust bag onto the suction port on the tank (fig.5). Secure the head unit onto the tank (fig.6).
5.4.
HOSE, TUBE, BRUSH & DETERGENT PIPE (FIG.7A & 7B)
Check the tightness of the following parts, in case of suction and water leakage.
FIG.7a
5.5.
DETERGENT (FIG.8)
Fill the detergent tank with detergent; the max volume is 3L.
Thick detergent should be diluted or the pipe may block.
6.
OPERATION
6.1.
SWITCH (FIG.9)
The switch has three options:
(I) - Turns the unit ON.
© Jack Sealey Limited
FIG.9
(O) - Turns the unit OFF.
Original Language Version
FIG.8
FIG.10
- Operates the detergent pump and spray gun.
FIG.7b
FIG.11
PC310.V2
Issue 1
06/12/23
Advertisement
