Lenovo Legion 5i Hardware Maintenance Manual page 42

Figure 13. Disconnect the battery pack cable and release antennas from the fan
Step 2. Disconnect the fan cables, remove two screws, and loosen seven screws in alphabetic order as
shown. Then, remove the thermal module.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 14. Remove the thermal module
Screw specifications
M2 × L3
Go to
https://support.lenovo.com/partslookup
replacement parts:
Thermal module
36
Lenovo Legion 5i (16", 9)Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following
Torque
1.85 ± 0.15 kgf-cm