RavensBlight MANOR Assembly Instructions

Table of Contents

Download this manual

RAVENSBLIGHT MANOR

ASSEMBLY INSTRUCTIONS-

WHAT YOU'LL NEED : Scissors, an X-acto knife, Elmer's glue, Scotch tape, and a ruler.

HELPFULL HINTS: Although these toys can be printed on ordinary paper, they work

best if printed on heavy card stock (80lb paper works great). Start by cutting out the

general area of the piece you're working on, so you won't have extra paper flopping

around. Then carefully cut out the object itself (be careful not to cut off any of the tabs).

Once the item is cut out, you'll want to fold everyplace that needs folding before taping or

gluing anything. The fast easy way to make folds is to fold the paper over the edge of a

ruler or other straight-edge. Once the shape is folded properly you may then tape or glue

everything in place. Elmer's glue works good if you smear a small area and let it set a

moment to firm up before attaching things. Glue sticks also work well.

ASSEMBLY: We begin construction by cutting out the main structure and porch floor on

page 1. Don't remove any black areas, just the white ones. Fold down the tabs at the top

and bottom of the main structure, and then fold down the two side walls between the red

marks. Next fold the long black sides of the porch floor down, and fold the two shorter

sides up. Set the main structure upright and glue one of the long black sides of the porch

floor to the black area at the bottom of the main structure front wall.

Now snip out the parts on page two. Fold both porch sides down between the red marks.

Wrap the porch panel around the porch floor and glue the end planks to the sides of the

main structure. Next fold down the orange tab on the porch roof and fold down the two

triangular sides. Glue the orange strip to the black strip in the center of the main

Table of Contents

Need help?

Do you have a question about the MANOR and is the answer not in the manual?

Page 1 RAVENSBLIGHT MANOR ASSEMBLY INSTRUCTIONS- WHAT YOU'LL NEED : Scissors, an X-acto knife, Elmer's glue, Scotch tape, and a ruler. HELPFULL HINTS: Although these toys can be printed on ordinary paper, they work best if printed on heavy card stock (80lb paper works great). Start by cutting out the general area of the piece you're working on, so you won't have extra paper flopping around.
Page 2 (RavensBlight Manor Assembly Instructions Page 2.) structure front wall, and glue both small end planks to the side walls. Why, it's beginning to look like home already, isn't it? Fold down the black tabs, strips, and triangles on all four sides of the main roof. Fold down the two orange tabs in the chimney slot.
Page 3 Now it's time to step back and admire the finished exterior of RavensBlight Manor. We could even consider our model finished at this point, but it's much more fun to include the interior, so lets move on inside and see what we can do…...
Page 4 You now have the final option of deciding whether or not you wish to include trees around your new manor house. I could never decide whether I preferred the model with or without them, but I decided they do add a certain atmosphere, so they're included on page 9 if you want to use them.