Regin Regio RC-DFO Manual

RC-DFO is a room controller in the Regio series. It has a
button for three-speed fan control (fan-coil) and a display.
The controller does not have a communication port.
Regio
Regio is an extensive range of controllers for control of
heating and cooling.
The controllers are divided into three different series;
Mini, Midi and Maxi. The Midi range consists of
pre-programmed controllers with communication.
Maxi consists of freely programmable controllers
with communication. The Mini controller range, of
which RC-DFO is a part, consists of pre-programmed,
stand-alone controllers.
Applications
The Regio controllers are suitable for use in buildings
requiring optimum comfort and reduced energy
consumption, such as offices, schools, shopping centres,
airports, hotels and hospitals.
See application example on page 3.
Sensor
The controller has a built-in sensor. An external sensor for
room temperature or change-over can also be connected
(PT1000).
Actuators
RC-DFO can control 0...10 V DC valve actuators and/or
24 V AC thermal actuators.
RC-DFO
RC-DFO
Room controllers with display, fan button and
manual forced ventilation function
RC-DFO is a room controller from the Regio Mini series
intended to control heating and cooling in a single zone.
Short facts about RC-DFO
• Easy installation
• Built-in function for forced ventilation
• On/Off or 0...10 V control
• Input for occupancy detector, window contact,
condensation detector and change-over
function
Easy to install
The modular design, featuring a separate bottom plate for
wiring, makes the entire Regio range of controllers easy to
install and commission. The bottom plate can be put into
place before the electronics are installed. Mounting takes
place directly on the wall or on an electrical connection
box.
revision
12 2016