Panel Facilities - Pioneer CT-W103 Service Manual

CT-W103
8. PANEL FACILITIES
@ POWER (STANDBY/ON) switch
NOTE:
© Function display
The POWER switch activates the secondary transformer only. © REC LEVEL ATT button (@ OFF, .{ ON)/
Even when the switch is in the STANDBY position, there will COPY SPEED button (& NORM, — HIGH)
be a power flow to the deck's circuits as long as the power e ifthe sound is distorted , set this button to ON to attenuate
cord is connected to a power outlet. the level and reduce distortion.
e@ When recording from one tape to another tape, this button
@ Deck I operation buttons can be used to switch between NORMAL SPEED and HIGH
m» (PLAY) : Playback SPEED recording.
<< (REW) : Rewind
me (FF) : Fast forward
w/& (STOP/EJECT) : Stop/Eject
tt (PAUSE) : Pause w Dolby NR System
@ Deck Il operation buttons Dolby NR systems are designed to reduce the amount of tape
@ (REC) : Recording hiss, mainly in the treble components. During recording, the
> (PLAY) : Playback high-pitched pianissimo sounds which are most characteristic
«¢< (REW) : Rewind of audible noise are boosted, and during playback, only these
pe (FF) "Past forward boosted aves heartbeat so se the te is returned
i : to normal. As a result, the noise is attenuated by an amount
amo ia equal to the boosting in the treble range. The Dolby NR ON
system reduces noise in the treble range, cutting tape hiss and
@ DOLBY* NR switch (B OFF, .. ON) expanding the dynamic range.
*
*® Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
° "DOLBY" and the double-D symbo! OQ are trademarks of
Dolby Laboratories Licensing Corporation.
NOTE:
When a tape has been recorded using the Dolby NR system,
make sure that the DOLBY NR switch is set to the ON position
during playback.
Function display
OPERATION MODE INGICATOR
MAX LEVEL MAX
AUTO
REC LEVEL
CONTROL
REC
ATTENUATDAI
HIGH SPEED
@ Level meter
® The (CO between the -3 and 0 mark indicates the reference
level for the Dolby NR system.
(8: REC/COPY indicator
Lights up during recording or copying.
9° ATTENUATOR/HIGH SPEED indicator
e Lights up during recording when the REC LEVEL ATT switch
is set to ON.
e Lights up during High speed copying.
23