Table of Contents
Advertisement
en operation
Do not mix detergent and fabric
¡
softener
Do not use products that have ex-
¡
pired or are highly congealed
do not use products containing
¡
solvents, caustic agents or volatile
substances
Use dyes sparingly as salt may
¡
damage stainless steel
Do not use color-bleaching agents
¡
in the appliance
Do not pour vinegar into the dis-
¡
pensers → Page 36 of the intelli-
gent dosing system
operation
13 Basic operation
operation
13.1 Switching on the appli-
ance
Note: If you switch the appliance on
the first time after you have connec-
ted it to the electrical system, the
switch-on process takes up to one
minute.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
▶
The switch-on process takes a few
seconds.
An audible function test is carried
a
out.
Note: The lighting for the drum goes
out automatically.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 27
32
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 32
Setting additional programmes
Requirement: Home Connect is set
up.
→ "Setting up Home Connect",
Page 38
Set the App programs
1.
gramme.
If Remote Start
Press Remote Start .
2.
The Home Connect app displays
the programmes that can be selec-
ted.
Set a programme in the
3.
Home Connect app.
If required, adjust the programme
4.
settings.
→ "Adjusting the programme set-
tings", Page 32
Start the programme.
5.
→ "Starting the programme",
Page 33
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 32
Adjust the programme settings.
▶
→ "Buttons", Page 24
Observe the information about op-
erating logic → Page 18.
Notes
The programme settings are not
¡
saved permanently for the pro-
gramme.
The setting is saved if you activate
¡
or deactivate the intelligent dosing
system.
pro-
flashes,
Advertisement
Table of Contents
