Tripp Lite LC1200 Owner's Manual page 2

Safety
This manual contains important instructions and warnings that should
be followed during the installation, operation and storage of all Line
Conditioners.
Line Conditioner Location Warnings
• Install your Line Conditioner indoors, away from excess moisture or heat, dust or
direct sunlight.
• For best performance, keep the indoor temperature between 0° C and 40° C
(between 32° F and 104° F).
• Leave adequate space around all sides of the Line Conditioner for proper ventilation.
Line Conditioner Connection Warnings
• Connect your Line Conditioner to a three-wire, grounded AC power outlet. Do not
remove or modify the ground pin of the Line Conditioner's plug.
• Do not use two-prong adapters with the Line Conditioner's plug. Do not plug your
Line Conditioner into itself; this will damage the Line Conditioner and void your
warranty.
• If you are connecting your Line Conditioner to a motor-powered AC generator, the
generator must provide clean, filtered computer-grade output.
• Use care when connecting country-specific plugs to selected 220/240V, 50/60 Hz
Line Conditioners. Hot 1 and Hot 2 may be reversed. When using a French CEE7/7
plug, always use the separate grounding pin supplied with the unit. When using a
Schuko CEE7/4 plug, an ungrounded condition will exist unless separate grounding
to the rear of the Line Conditioner is provided by the user.
Equipment Connection Warning
• Do not use Line Conditioners for life support applications in which a malfunction or
failure of a Line Conditioner could cause failure or significantly alter the
performance of a life-support device.
Line Conditioner Maintenance Warning
• Line Conditioners require no maintenance. Keep the Line Conditioner dry at all
times. DO NOT open the unit for any reason.
2