Huawei S2700-EI Series Hardware Description page 25

S2700-EI Series Ethernet Switches
Hardware Description
Number
6
Issue 07 (2014-10-25)
Indicator/ Color
Button
Green
MODE: mode -
switch button
NOTE
In
V200R006C10
and later
versions, you can
hold down this
button for 6s to
start the web
initial login
mode:
l If the switch
has no
configuratio
n file, the
system
enters the
web initial
login mode.
In this case,
all mode
indicators
turn green
and stay on
for a
maximum of
10 minutes.
l If the switch
has a
configuratio
n file, the
system
cannot enter
the web
initial login
mode. In this
case, all
mode
indicators
fast blink for
10s, and then
restore to the
default
mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Steady on: The service port indicators
show the PoE status. After 45 seconds, the
service port indicators automatically
restore to the status mode (default).
l When you press this button once, the
service port indicators change to the
stack mode and show the stack ID of
the local switch.
l When you press this button a second
time, the service port indicators change
to PoE mode and show the PoE status
of ports.
l When you press this button a third time,
the STAT indicator turns green and the
service port indicators restore to the
default mode.
If you do not press the MODE button
within 45 seconds, the service port
indicators restore to the default mode. In
this case, the STAT indicator is steady
green, the PoE indicator is off, and the
STCK indicator is off or blinking green.
2 Chassis
18