Huawei S2700-EI Series Hardware Description page 22

S2700-EI Series Ethernet Switches
Hardware Description
Numbe
r
5
Issue 07 (2014-10-25)
Indicator/ Color
Button
MODE: mode -
switch button
NOTE
In
V200R006C10
and later
versions, you can
hold down this
button for 6s to
start the web
initial login
mode:
l If the switch
has no
configuration
file, the
system enters
the web
initial login
mode. In this
case, all
mode
indicators
turn green
and stay on
for a
maximum of
10 minutes.
l If the switch
has a
configuration
file, the
system
cannot enter
the web
initial login
mode. In this
case, all
mode
indicators
fast blink for
10s, and then
restore to the
default
mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
l When you press this button once, the
service port indicators change to the
stack mode and show the stack ID of
the local switch.
l When you press this button a second
time, the STAT indicator turns green
and the service port indicators restore
to the default mode.
If you do not press the MODE button
within 45 seconds, the service port
indicators restore to the default mode. In
this case, the STAT indicator is steady
green, and the STCK indicator is off or
blinking green.
2 Chassis
15