InFocus LPX9 Reference Manual page 11

Introduction
English ... 0
5 Keystone
Correction
6 Source
7 Menu
8 AV-Mute
9 Reset
10 Video 1 Source
(S-Video)
11 Video 2 Source
(Composite)
12 Digital Zoom
13 Enter
14 Re-Sync
15 Four
Directional
Select Keys
16 Source Lock
17 Volume -/+
Adjust the image to compensate
for distortion caused by tilt-
ing the projector (vertical ± 15
degrees).
Press "source" to choose RGB,
Component, S-Video, Composite
and HDTV sources.
Press "menu" to launch the On-
screen display (OSD) menu, back
to the top level of OSD menu for
the OSD main menu operation
Momentarily turn off/on the
audio and video.
Change the adjustments and set-
tings to the factory default
value.
Press "video 1" to choose video 1
connector.
Press "video 2" to choose video 2
connector.
Zoom the projector display in or
out.
Confirm your section of items in
sub menu operation.
Automatically synchronize the
projector to the input source.
Use up, down, left, right buttons
to select items or make adjust-
ments to your selection.
Press "source-lock" to lock speci-
fied connection port; press this
again to unlock.
Increase/decrease speaker vol-
ume.