Cisco Nexus 93400LD-H1 Hardware Installation Manual page 8

Overview
1 50-GE ZSFP ports (48)
3 LEDs (BCN, STS, ENV, SYNC, GPS, TIMING)
To determine which transceivers, adapters, and cables are support this switch, see the
Modules Compatibility Information
The following figure shows the switch features on the power supply side of the chassis.
1 DIN connector (1 PPS)
3 Power supply modules (1 or 2) (AC
power supplies shown) with slots
numbered 1 (left) and 2 (right)
5 USB port
7 Management port (RJ45)
9 Fan modules (5) with slots
numbered 1 (left) to 5 (right)
The following figure shows the switch features on the side of the chassis.
Cisco Nexus 93400LD-H1 NX-OS Mode Switch Hardware Installation Guide
2
2 400-G QSFP-DD ports (4)
document.
2 DIN connector (10 MHz)
4 Time of Day (ToD) port
6 Management port (SFP)
8 Console port
Overview
Cisco Transceiver