Sony HANDYCAM DCR-HC30 Operation Manual page 102

Touch the desired item.
When you are recording on a tape in
the VCR
Touch [OTHER DEVICE[.
10Touch IMARK
OUT].
The ending point of the first program is set,
and the lower part of the program mark
changes to light blue.
When you are recording on a
"Memory Stick Duo"
1 Touch [MEMORY STICK].
2
Touch [IMAGE SIZE] repeatedly to
select the desired image size.
7 Search for the beginning of the first
scene that you want to dub on your
camcorder, then pause playback.
You can adjust the position wilh _ /
(frame).
Touch [MARK IN].
The starting point of the first program is set,
and |he upper part of the program mark
changes to light blue.
[iMAGE SIZE] appears when recording
on a _Memory Stick Duo."
Search for the end of the first scene
that you want to record on your
camcorder, then pause playback.
You can adjust the position wilh _ /
(frame).
11 Repeat steps
7 to 10 and create
programs.
12Set
your VCR to recording pause.
Skip |his step if your camcorder is
connected via an i.LINK cable or recording
oll a "Memory Stick Duo."
13Touch
ISTARTI.
START _ll 000 0000
REC pAJSE
TOTAL 0_00_00_25 ]
14Touch
IEXECI.
A search for lhe beginning oflhe first
program starts, then the recording starts.
[SEARCtt] appears during the search and
[EDITING] appears during editing.
When a program is recorded, the program
mark changes from orange to light blue.
When all programs have been recorded, the
program editing operation stops
automatically.
To cancel recording, touch [CANCEL[.
102 Dubbing/Editing