Table of Contents
Advertisement
REAR PANEL FACILITIES
AC OUTLETS
[SWITCHED}
Power supplied through these outlets is turned on and off by the
receiver's POWER switch. Total electrical power consumption of
connected equipment should not exceed 100 W.
[UNSWITCHED}]
Power flows continually to this outlet, regardless of whether the
receiver is switched ON or OFF. Electrical power consumption of
the connected equipment should not exceed 200 W.
The equipment should be disconnected by removing the mains
plug from the wall socket when not in regular use, e.g. when on
vacation.
NOTE:
Do not connect appliances with high power consumption such
as heaters, irons, or television sets to the AC OUTLETS in order
to avoid overheating or fire risk.
This can cause the receiver to malfunction.
FM/AM
ANTENNA
terminals
Use these antenna
terminals
for reception
of CATV
FM,
normal FM and AM broadcasts
[TO MONITOR TV jack]
Use to connect a TV set for watching program materials
from the VCR or VDP connected to this unit.
Connect to a monitor TV or to a TV set with video input
terminals.
[TO RF MODULATOR
jack]
Use to connect a TV set for watching program materials
from the VCR or VDP connected to this unit.
Use to connect a normal TV set. When performing con-
nections,
the
RF
MODULATOR
JA-RF5
(sold sepa-
rately) is required. By connecting an RF modulator, video
signals can be converted to VHF signals (U.S. channel 3
or 4), thus allowing this unit to be used to view the
selected source on a normal television set.
NOTE:
A "normal TV set" as noted above is one for which RF
connections alone are possible.
SPEAKERS terminals
A: Connect
to a first set of speakers
(or the front
speakers in a surround system).
B: Connect to a second set of speakers (or the surround
speakers in a surround system).
SURROUND
LEVEL selector switch
(VSX-3000 only)
By selecting one of the three positions (L: Low, M: Mid,
H: High), the sound volume from the surround speakers
can be changed.
Power cord
S
<ARB10455
Advertisement
Table of Contents
