Table of Contents
Advertisement
@ important Management Points Regarding Safety .
-_———e
-
~
7
~
4 -Q905 1C901 Q903 N
J:
5216507 (UL approved No.)
C : VTP52A5-011F (Marking)
SPT-1
KP-10 or SU-1
SPT-1
KP-10 or SU-1
VDE
KP-419C
BASEC BS6500
@ The end of respective power cords is soldered in the air
and the space from others must be 3.2 mm or more in
the distance.
6) The strain relief which
is specified as '""NIFCO 2271"
Features
1.Double
auto-reverse
mechanism
for
recording/playback
in
deck
B
and
Mt aBuog
7° TO-W30d
-
The DDRP function is possible oniy when
used with a suitable JVC CD player.
RB303N
d> @®
/10-W305 ony
~—
securely fixes the power cord.
© The primary terminals and secondary terminals next to
them of the P.C. board must not be stuck out by the
round end to keep space in each side.
Since the following parts are heat generating ones, they
must not contact with electrolytic capacitors, wires, etc.
e Parts in parentheses (
) are inflammables. Make
sure of their lift-up condition for this purpose.
e Parts in box ([_—) are out of JVC control.
(R952), (R919),
(R920), (R913), (R902), (R901),
(R931), (R912), (R881), (R875), (RB403, RB303)
4: only in TD-W205 and TD-W204
D902],
[R902],
[a903],
[ic90T],
[905],
[R973], [O906], [907], [R937],
[Heat sink]
R952 : Must not touch any wire.
() Wires and so forth must be securely clamped or fixed as
illustrated on the left (at five points) to keep them from
power active parts, mobile parts, heating units and sharp-
edged parts.
* : TD-W75 has no need of this clamp.
14, COMPU LINK-1/SYNCHRO terminal
—
Pro Griginated by Bang & Olufsen.
e High-speed dubbing function reduces
tape editing time by half.
. Dolby* HX PRO headroom extension
. Dolby* B & C noise reduction system
e Built-in MPX filter
. DDRP (Dynamics Detection Recording
Processor) compatibility
(No, 4325) 3
Advertisement
Table of Contents
