Advertisement
How to Clean
1. Press the dust bin switch buttons on both sides of the host at the same time,
and the dust collection hood will open automatically.
2. Remove the filter element from the dust collection hood.
3. Rotate the filter element anticlockwise to separate the steel mesh from the
HEPA filter element.
4. Pour the garbage in the dust collection hood into the garbage can.
5. If necessary, clean the dust collection cover with a slightly wet rag or
disposable paper towel; The filter element can be flushed with water.
6. After cleaning, the filter element must be thoroughly dried before reuse. (Do
not expose to the sun)
Note: After washing, the filter element must be dried and then installed into
!
the dust collection cover. It is forbidden to install the filter element into the
dust collection cover without drying, so as to prevent the moisture of the filter
element from causing corrosion of the motor and the base plate.
Push the
button
take out the
trash
Take out the
filter element
Cleaning the
HEPA filter
7
Counterclockwise rotation
Air dried HEPA
filter element
Advertisement
