Advertisement
1. Place the vacuum cleaner on the desktop/flat surface.
2. Insert the USB power cable into the charging hole of the vacuum cleaner.
3. Connect the other end of the power cord to a 5V
a USB charger, mobile power supply, etc.
Note: Please use the charging cable delivered by this machine or the purchased
mobile phone charger to charge the product.
Note
1. When the power supply is exhausted, the three indicators flash and turn off to
protect the equipment.
2. The battery is not removable. Please do not squeeze or remove the battery.
3. When the ambient temperature exceeds 50℃/140℉, it is forbidden to use the
battery.
4. Please charge the battery to 60% before not using the storage for a long time.
5. If the machine stops working in a short time, please keep the battery fully
charged.
Accessories installation and use
1. Suction nozzle: suitable for dust cleaning of various gaps such as doors, seats,
cabinet corners, drawers and ashtrays.
2. Brush: It combines the dual functions of suctionand wiping, and is suitable for
cleaning dust on various surfaces such as cushions,suede parts of foot pads,
keyboards and air-conditioning outlets.
3. Corrugated hose: it can be twisted at any angle, and can be used to clean
various inaccessible corners with other accessories.
4. Extension tube+floor brush: suitable for dust cleaning on the floor, bed bottom,
sofa bottom, cabinet bottom and various large flat surfaces that cannot be
touched.
2.4A USB socket, such as
4
Advertisement
