Table of Contents
Advertisement
TOYOTA SAFETY SENSE
ADJUSTING DISTANCE (CONTINUED)
(3) Acceleration when there are no longer any preceding vehicles driving
slower than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
Note: When your vehicle is too close to a vehicle ahead, and sufficient
automatic deceleration via the cruise control is not possible, the display will
flash and the buzzer will sound to alert the driver. An example of this would be
if another driver cuts in front of you while you are following a vehicle. Depress
the brake pedal to ensure an appropriate vehicle-to-vehicle distance.
SWITCHING TO CONSTANT SPEED (CRUISE) CONTROL MODE
If you are already using DRCC "
push and hold the switch for at least 1.5 seconds to switch.
Note: When the vehicle is turned off, it will automatically default to DRCC.
SETTING CONSTANT SPEED (CRUISE) CONTROL
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SET SPEED on
page 42.
Refer to the Toyota Owner's Manual for additional information on DRCC operation,
settings adjustments, limitations, and precautions before attempting to use it.
™
1.5 seconds
," push "
" to turn the system off first, then
Set
44
Advertisement
Table of Contents
