Kenwood DPC-92 Instruction Manual page 17

i Introduction program entry <Fig. 12> :
This function allows to program only desired tracks while listening to the beginning of every track
by Introduction play (refer to page 15).
® The direct music selection buttons on the remote control unit cannot be used.
(21) Push the REPEAT button Four times. Pups
ae tat ee etal ine
(22) Push the P. MODE/EDIT button on the remote controller to
start the INTRODUCTION play. jr ei
Biink Rs WEP
(3) When a track you want to program is played, press the
P.MODE/EDIT button. =
i see, m1 c alot
Blinkers HT
@ During Introduction program entry, the »P1 and Kt buttons can be used to skip tracks as
required.
@ The search function (FF/REV) and the pause function do not work during Introduction pro-
gram entry.
@ Confirmation of the programmed contents
@ This function can be operated when the disc is programmed
and stopped.
ay ae peroem
ft_rrove
Push the P.MODE/EDIT button on the remote controller.
@ Indicates the Program number 1. Track programmed Program No.
(25) If the P. MODE/EDIT button is pressed repeatedly:
@ Then the programmed contents are indicated in order.
@ If the music orders are indicated until the last programmed track, the indication returns
to Program number 1.
@ How to cancel all the programs
Put the unit to POWER OFF or open the lid:
@ Push the STOP [ ff] button once when the musics are is programmed and the disc is
stopped in order to enter the unit into the stop mode, or press the STOP [ lf ] button twice
during play in order to put the unit to POWER OFF.
@ How to change the contents of the program
Call the program number to be changed by pressing the P. MODE/EDIT button on the re-
mote controller.
Example:
When you wish to change the music in Track 11 of the Program Number 2 to Track 8, call
the Program Number 2 by pressing the P. MODE/EDIT button.
Enter the track number either by using the numeric keys, or by using the > and
buttons and pressing the P.MODE/EDIT button.
ro sa SN Ae
! ea
i} P-ge suay-oe
mc
terre ua P-oe
Track No. Program No.
ppc-92 17