Table of Contents
Advertisement
Quick Links
Installation Manual
SLX Light Engine
WARNING
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment in accordance with the latest applicable
version of AS/NZS 3000, along with any other applicable local or council codes/standards. Before installing this product, read and follow all warning notices and instructions
that accompany this product. Failure to follow warning notices and instructions may result in property damage, personal injury, or death. Improper installation and/or
operation may void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property damage, or death.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product. This information should be given to
the owner/operator of this equipment.
Advertisement
Table of Contents
Related Manuals for Astralpool SLX Light Engine
Summary of Contents for Astralpool SLX Light Engine
- Page 1 Installation Manual SLX Light Engine WARNING FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment in accordance with the latest applicable version of AS/NZS 3000, along with any other applicable local or council codes/standards. Before installing this product, read and follow all warning notices and instructions that accompany this product.
-
Page 2: Australia Warranty
ENGLISH AstralPool SLX Light Engine | Installation Manual ® Record your equipment details here for quick reference: WARRANTY Model No. : REGISTRATION Serial No. : AUSTRALIA WARRANTY: For full warranty terms and conditions and to register your warranty, visit www.astralpool.com.au/warranty and complete your details. - Page 3 AstralPool SLX Light Engine | Installation Manual ENGLISH ® Table of Contents Section 1. Important Safety Instructions ..4 Section 2. Package Contents....... 4 Section 3. Light Engine Preparation .... 5 Section 4. New Installation ......5 4.1 Concrete Pool Installation ......5 4.2 Flush Mount Installation ......
-
Page 4: Section 1. Important Safety Instructions
NOTICE The AstralPool Pool and Spa niches are intended for installation in fresh water and salt water swimming pools and spas. It is important to ensure that the lights in which the niches are installed are intended for their appropriate application, either fresh water or salt water. -
Page 5: Section 4. New Installation
Figure 2. Plug and Socket Alignment 5. Double check that the cable gland inside the niche Figure 4. SLX Light Engine Concrete Installation is tightened. Coil the remaining cable into the niche, NOTE: Do not look directly at the light whilst it is operating. - Page 6 2. Test fit the new SLX light by following the steps for Section 4.1, Concrete Pool Installation. If your new SLX light fits, proceed with the installation. If the light doesn’t fit, please contact AstralPool for further Bottom Tab advice. NOTE: DO NOT SUBMERGE the SLX light into pool water unless it Figure 5.
- Page 7 AstralPool SLX Light Engine | Installation Manual ENGLISH ® 2. Trim the ends of both of the cables to be joined as shown. Note that if either cable has solder on the cables this section should be cut off so that the bare wires are exposed.
- Page 8 Rosedale Auckland 0632, New Zealand NZBN: 942 903 181 70759 AstralPool.co.nz | 0800 807 665 A Fluidra Brand ©2023 ASTRALPOOL is a registered trademark of FLUIDRA COMMERCIAL, S.A.U., used under license. This document is subject to change without notice. H0812300_REVA...
Need help?
Do you have a question about the SLX Light Engine and is the answer not in the manual?
Questions and answers