Digital door viewer with camera, motion sensor, smart function and night lighting (8 pages)
Summary of Contents for Virone PLUTON
Page 1
OPERATING AND INSTALLATION MANUAL VIDEO-DOORPHONE SET PLUTON VDP-51...
Page 2
TABLE OF CONTENTS 1. Table of contents..................2. Introduction ....................3. Cleaning and maintenance ............... 4. Description ....................5. Elements of the set ..................6. Installation ....................a) Monitor installation ..................b) Outdoor unit installation ................7. Wiring schemes ..................a) Set wiring scheme ..................
INTRODUCTION Before using the device, read this Service Manual and keep it for future use. In case something written herein is unclear, please contact the seller. Installation and commissioning of the equipment by the customer are possible if the installer has basic knowledge of electrical systems and the use of proper tools.
DESCRIPTION PLUTON video-doorphone set has been designed for single-family buildings, office buildings, schools, kindergartens, hospitals, etc. Functions: - integrated monitoring function that delivers camera image at all times, - conversation with the visitor standing outside, - independent, remote door lock opening and gate access control from the monitor panel,...
INSTALLATION Recommended installation height for the monitor is ca. 145-160cm, and 140-170cm for the outdoor unit. a) Monitor installation Fig.3 Monitor installation 1. Use screws to install monitor mounting frame (included to the set) to the wall. 2. Connect wires to terminals placed at the back of the monitor, as per the wiring scheme. 3.
WIRING SCHEME It is not recommended to put video-doorphone wires together with other installation wires (chime, alarm, etc.) in one cable. All telecommunication and power cables that emit strong magnetic fields (e.g. column loudspeakers, TV sets) may have negative impact on the video-doorphone set operation, if they are placed close to the wires that connect outdoor panel with the monitor.
OPERATION 1. Talking mode Press the call button on the outdoor unit to trigger the ringtone on the indoor monitor and to display visitor's image on the screen. In order to start a conversation press on the monitor. In order to end it, press again.
TROUBLESHOOTING 1. There is no sound and image. The device does not work a) check power connection b) monitor is damaged or wrongly wired 2. Image is unclear and blur a) check and adjust the settings 3. There are strong interferences, the image is not synchronized (it flashes) a) section of the connecting wire does not correspond to its length b) installation is too long –...
Need help?
Do you have a question about the PLUTON and is the answer not in the manual?
Questions and answers