Pioneer TX-1080Z Operating Instructions Manual page 16

Fm/am digital synthesizer tuner / stereo amplifier
Hide thumbs Also See for TX-1080Z:
Table of Contents

Advertisement

OPERATIONS
(3) Press the MEMORY
switch.
* The display will flash (about 10 seconds).
[beeeemeemmmmememnenssranen
[ Yon f |
(4) Press the STATION CALL switch
While
the display is flashing, press the switch cor-
responding to the station which you wish to preset or
re-preset.
When presetting a station to Mode 1 (e.g. presetting
a station to No. 9):
| When presetting a station to Mode 2 (e.g. presetting |
| a station to No. 21):
|
i
By pressing the station call switch twice, the station wil
be preset to Mode 2.
Frequency
dispiay
Station call switch number
Press twice
eAfter
you
press
the STATION
CALL
switch,
the
display will flash for about 2 seconds, then the station
will be memorized. If you press another switch while
the display is flashing, the station will not be memoriz-
By pressing the station call switch once, the station will
ed.
be preset to Mode 1,
Frequency
display
20
9/21
10)
Station call switch number
Press once
NOTE:
Preset station tuning
(1)
{1) Press the STATION
CALL switch into which the
desired station has been memorized.
* To listen to a Mode 1 broadcast, press the switch
once, and to listen to a Mode 2 broadcast, press it
twice.
® By pressing the STATION
CALL switch, the switch
number
will be displayed, then the frequency will
be displayed.
STATION CALL switch "memo"
It is recommended that you make a note ofthe preset stations.
ff, for example, you wish to receive the station memorized in
STATION CALL switch "13" when listening to the station
memorized in switch "9", press switch "13" instead.
in this way, simple and accurate reception of any desired sta-
tion is possible.
NOTE:
©
The contents of the
STATION CALL switch will be preserved
for several days, even if the amplifier's power cord is unplugged.
©
/fa preset station has been erased, reset it.
Last station memory
e
When
the amplifier's POWER
switch is pressed to turn
power on, the last station received before the power:was
previously turned off will be received again.
e
When power is ON, if the BAND selector switch is pressed,
the last station received before the BAND selector switch
was previously pressed will be received again.
S.C. switch)
«
1
2
3
4
5
Name of broadcast
station
|
Frequency
|
$C. switch| ee | 13
14
15
16
7
18
19
20
21
22
23
24
Name of broadcast
station
Frequency
16
<ARB1070>

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-1480

Table of Contents