Advertisement
Quick Links
Kit contents
•
1x Left arm
•
1x Right arm
•
1x Main back stretcher
•
1x Main adaptor slot plate
•
1x Adaptor part A
•
1x Adaptor part B
•
1x Minifigure mount
•
1x Minifigure mount lug
•
1x Phantom II arm
•
1x Phantom II adaptor
•
2x Wall plug (6x30mm)
•
2x Wall screw (4.5x50mm)
•
3x Small Command strip
Wall Mount Instructions
Ghost & Phantom II – (75357)
Ghost wall mount
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for GECKO BRICKS Ghost & Phantom II
Summary of Contents for GECKO BRICKS Ghost & Phantom II
- Page 1 Wall Mount Instructions Ghost & Phantom II – (75357) Kit contents • 1x Left arm • 1x Right arm • 1x Main back stretcher • 1x Main adaptor slot plate • 1x Adaptor part A • 1x Adaptor part B •...
- Page 2 Wall Mount Instructions Ghost & Phantom II – (75357) Partially insert the supplied technic push pins as shown With the adaptor assembly seated in the Lego set push the 4 included Techinc pins to secure in place You may adjust the angle of the set by repositioning the angled adaptor...
- Page 3 Wall Mount Instructions Ghost & Phantom II – (75357) Slide the Lego ship and adaptor assembly into You can rotate the set to 8 positions and slide the wall mount into the mount Phantom II wall mount...
- Page 4 Wall Mount Instructions Ghost & Phantom II – (75357) Minifigure wall mount Attach the Minifigure mount lug to the wall first...
Need help?
Do you have a question about the Ghost & Phantom II and is the answer not in the manual?
Questions and answers