MACHINE SOLUTIONS BEAHM DESIGNS 43-B User Manual

Bench top die necker

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

BEAHM DESIGNS BENCH TOP DIE NECKER

MODEL 43-B

Table of Contents

Summary of Contents for MACHINE SOLUTIONS BEAHM DESIGNS 43-B

Page 1 BEAHM DESIGNS BENCH TOP DIE NECKER MODEL 43-B...
Page 2: Table Of Contents
Resetting the temperature controller ..................8 Changing Temperature Units on the Omega Temperature Controller ........17 Maintenance ..........................17 Facility Requirements ........................ 18 Warranty ............................18 Return Material Authorization ....................18 © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...
Page 3: Welcome
Equipment User Manual Welcome Machine Solutions, Inc. (MSI) would like to take this opportunity to thank you for purchasing your new 43-B Bench Top Die Necker. At MSI, we are dedicated to bringing innovative process development solutions to both medical device and nonmedical organizations.
Page 4: Safety
Hazards are materials that outgas hazardous substances and or ignite. (260°C/500°F). Note: This equipment is not for use in an ATEX environment. Note: Power down machine before disconnecting umbilical. © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...
Page 5: Die Head Replacement
5. To aid in obtaining tubing diameter, position the cooling air nozzle near the exit of the drawing die and switch cooling air “on” as tubing is drawn through the die. © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...
Page 6: Temperature Controllers (Omega Platinum Model)
Set the amount of time before the Autotune process gives up and times out in Minutes and Seconds (MM.SS). Slowly responding systems should have a longer time-out setting. Select the indicated setting. © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...
Page 7: Autotune (Prog > Pid > Tune)
4. Once the desired temperature is set, press the enter button to return to the main screen. Heaters will ramp to correct temperature. Temperature Controller Layout and Description of Button Actions Figure 1. Controller Layout © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...
Page 8: Resetting The Temperature Controller
NOTE: See the following chart for the correct settings for the Beahm 43-B. Settings to change in RED. Initialization Mode Menu (INIt) a. The following table maps the Initialization Mode (INIt) navigation: © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...
Page 17: Changing Temperature Units On The Omega Temperature Controller
2. Cleaning should be with a soft dry cloth only. Warning Note: Ensure the machine is unplugged for any servicing or maintenance work. Note: Perform these steps ONLY when the machine is at room temperature. © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...
Page 18: Facility Requirements
To request an RMA, please contact us at 928-556- 3109 or email info@machinesolutions.com For additional information on Beahm Designs, Split Die Thermal Bonder, please visit http://machinesolutions.com/our-products/ © Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B...

MACHINE SOLUTIONS BEAHM DESIGNS 43-B User Manual

Quick Links

Related Manuals for MACHINE SOLUTIONS BEAHM DESIGNS 43-B

Summary of Contents for MACHINE SOLUTIONS BEAHM DESIGNS 43-B

Table of Contents