Switching The Appliance On/Off; Selecting A Mode And Intensity Level - Silvercrest SKM 20 B3 Operating Instructions Manual

Switching the appliance on/off
♦ Plug the power plug into a mains socket.
♦ Press and hold the
A beep sounds, and the operating indicator 1 lights up continuously in white.
♦ Press the
operating indicator 1 goes out.
Note: The appliance switches off automatically after approx. 20 minutes to avoid
overheating. Let the appliance cool down for about 10 minutes before switching it on
again.
♦ Unplug the mains plug from the mains socket when you are no longer using the appliance.

Selecting a mode and intensity level

Note: The appliance is in mode 1 and intensity level 1 when switched on.
♦ Press the
Mode
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
♦ Press the
♦ Press the
Note: (1) The appliance offers 5 intensity levels in each of the 5 modes. (2) Each time
the mode or intensity level is changed, a beep sounds. (3) Start in mode 1 and with
intensity level 1, as preset, to avoid unpleasant feelings or pain. When you find the
treatment satisfactory and you are familiar with how to use the appliance, you can
switch to a higher intensity level and to another mode.
■ 8 │ GB │ IE
On/Off button 5 for about two seconds to switch on the appliance.
On/Off button 5 to switch off the appliance. A beep sounds, and the
mode selector button 2 to change the mode.
Function
Continuous pulse
1 pulse per second
1–2 pulses per second
2–3 pulses per second
Combination of modes 1–4
button 3 to increase the intensity level.
button 4 to decrease the intensity level.
SKM 20 B3