Advertisement
CHANGING PCS ALERT TIMING
(1) Press "
" or "
display)" from the Multi-Information Display (MID).
(2) Press "
" or "
"
." The setting screen is displayed.
(3) Press "
" or "
change the warning timing. Each time it is pressed, the PCS warning timing
changes as shown above.
(4) Press "
" to go back to the menu.
Note: PCS is enabled each time the vehicle is turned on. The system can be
disabled/enabled and the alert timing of the system can be changed. (Alert
timing only, brake operation remains the same.)
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press "
" or "
display)" from the Multi-Information Display (MID).
(2) Press "
" or "
PCS on or off.
(3) Press "
" to go back to the menu.
Note: The system is enabled each time the vehicle is turned on.
Refer to the Toyota "Owner's Manual" for additional information on PCS w/PD
operation, settings adjustments, limitations, and precautions before attempting to
use it.
" switches and select "
" switches and select "
" switches and select "Sensitivity" and then press "
" switches and select "
" switches and select "
Middle
(default)
Far
Near
(4.2-in display)" or "
PCS" and then press and hold
(4.2-in display)" or "
PCS" and then press "
39
(7-in
" to
(7-in
" to turn
Advertisement
