Page 1
Instruction manual Multi-Channel Receiver Multi-Channel Receiver 4 x 100W RMS The installation of this product must be made by a qualified professional.
Page 2
+55 18 3266 4050 or our website www.taramps.com.br/en. Presentation The TARAMPS THS 6000 is a Multi Channel Receiver developed with high technology to integrate different environments. Compact and powerful it can be used in several applications providing quality sound.
- In case of unwanted noise make sure that the cables and connections are in good condition. Leave the volume to a minimum of unused channels. Audio source The TARAMPS THS 6000 has the following audio inputs: 1. USB: Flash drive input * 2. MICRO SD CARD * 3.
Page 4
Knowing your equipment Front Panel 1 - MICRO SD: Micro SD memory card input. (The card must be positioned as the image shows, with the terminals facing up 2 - USB: Input to Flash Drive. 3 - Aux. (Connector P2): Receives audio signal from the P2 output of your phone, tablet, MP3, computer, among others.
Page 5
Front Panel (sequence) 15 16 9 - DIRECT AUX: indicates that the signal from the selected AUX input (AUX1, AUX2 or OPTICA) will be sent directly to the equalization/amplification stages without going through signal digitization processes, allowing superior audio quality (in this case the remote control will not work). 10 - OPTICAL: LED indicating the presence of an optical signal.
Function configuration mode With the device in Standby, press and hold the ON/STB key (20) for more than 5 seconds. The STANDBY LED (19) will flash indicating that the device is in configuration mode. The blue LEDS on the panel will indicate the current status, being: -DIRECT AUX(9) lit, indicates that the DIRECT AUX function is active.
Page 7
X-OVER key (frequency filters) These keys activate the frequency filters of the respective channels. The HPF and LPF filters complement each other and are ideal for combined use, i.e. in separate bass systems with a passive woofer or subwoofer box. The HPF filter used independently can help increase performance, durability and even improve distortion in small speakers that are not capable of reproducing bass efficiently.
Protection System The THS 6000 has a protection system against outputs overload and outputs short circuit. When the protections are activated, the ATT LED on the front panel turns on temporarily and the audio output is interrupted. About 2 seconds, or the audio is restored. If the protection system or system meets frequently, review the settings and installation of your system.
Remote Control Function O THS 6000 has a compact remote control, so you can remotely control the device with practicality. ON / OFF: Press the key to turn off the device. MODE: Change the audio source (USB, BLUETOOTH, SD, AUXILIARY, FM). MUTE PLAY / PAUSE: Pause or start the music to USB / SD / BLUETOOTH.
Page 10
Bluetooth When selecting the Bluetooth function (identified with “bt” on the display), the THS 6000 waits for a Bluetooth connection. Search for the device called “TARAMPS THS 6000” using your phone, tablet, PC or other and match it. - To connect to a new device, disconnect the current one and make the new Bluetooth pairing.
Page 11
Example of using OPTIC input Select AUX mode using the "MODE" key. Set the TV to standard PCM output. AUTO TURN ON: when the TV sends an optical signal, the device will automatically turn on and the OPTICAL LED will light up on the front panel. When there is no optical signal, the device turns off after 10 seconds.
Page 12
Examples of connections/configurations Example 1: System 2.1 with four bookshelf speakers + 1 passive bass speaker. All 4 ohms. CH1/CH2: X-OVER in HPF, ROUTE in L/R CH3/CH4: X-OVER in LPF, ROUTE in L+R 4 ohms 4 ohms 4 ohms 4 ohms 200RMS STEREO 4 ohms 200W RMS MONO...
The values mentioned are typical and may change due to the tolerance of components or the manufacturing process. For more information or questions visit our website or contact TARAMPS support. Taramps reserves the right to modify the contents of this manual without prior notice and not to apply the modifications to units previously produced.
Page 14
/ or jointly due to design flaws that make it inappropriate or unsuitable for the intended use, for a period of 12 months from the date of acquisition. In case of a defect in the warranty period, TARAMPS is responsible for the repair or replacement of the device manufactured by it.
Page 15
Manufactured by: TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Street: João Silvério, 121 • Res. Manoel Martins Alfredo Marcondes - SP Made in Brazil...