Specifications - Pioneer SX-311R Operating Instructions Manual

SPECIFICATIONS
<SX-311R, $X-307 >
Amplifier Section
Continuous Average Power Output is 70 watts* per chan-
nel, min., at 8 ohms from 20 Hertz to 20,000 Hertz with
no more then 0.8% total harmonic distortion.**
Continuous Power Output (both channel driven)**
20 Hz} 20 kHz, THD, 0.8%, BQ oo
Dynamic power output (with EIA test s i
2/48 Q watodey 148 W/130 W/90 W
Input: (Sensitivityimpedanc
BROW fe trae circltgh hie es eraeethara sl 2.5 mV/47 kQ
CD, VCR/LO, TAPE 1/DAT, TAPE 2 150 mV/22 kQ
Phono Overload Leved (T.HJ D. 0 01%, 4 kHz}
7OW + 70W
PHONO : 130 mv
Output Level
TAPE REC 150 mV/2.2 k@
Frequency Response
PHONO (RIAA Equalization) ---
cb, VCRILD. TAPE 1/DAT, TAPE 2
» 20 Hz to 20,000 Hz +0.5 dB
10 Hz to 70,000 Hz "33 dB
Signal to-Noise Ratio (IHF, short circuited, A network}
PHONO :
CD, VCR/LD, TAPE 1/DAT, TAPE 2
Graphic Equalizer frequency band - - -
72 4B
96 dB
100 Hz, 330 Hz, 1 kHz,
3.3 kHz, 10 kHz, +8 dB
FM Tuner Section
Frequency range
Usable Sensitivity eee
50 dB Quieting Sensitivity |
87.5 MHz to 108 MHz
12.3 dBt, IHF 11.1 2V/75 Q)
MONO 16.8 dBf (1.6 /75 9)
STEREO - - 38.6 dBf {19.5 .V/75 Q)
Signal-to-Noise Ratio
MONO 73 dB (at 85 dBF)
STEREO - 70 dB (at 85 dBf
Distortion
STEREO ~
Alternate Channel Selectivity
Stereo Separation
Frequency Response
Antenna Input
AM Tuner Section
Frequency range
When 10 kHz step «-
0.3% (1 kHz)
50 dB (400 kHz)
35 dB (1 kHz)
2 "30 Hz to 16 kHz (+1 dB)
300 9 balanced, 75 @ unbatanced
530 kHz to 1,700 kHz
{SX-311R only}
When 9 kHz step c v e r e s s s s r r r r e s seesterrees vemeeese B34 KHz to 1,602 kHz
Sensitivity
(HF, Loop antenna - ~ 350 Wim
Selectivity ~~ 20 dB
Signal-to-Noise Ratio - 50 dB
Antenna - - AM Loop Antenna
Miscellaneous
Power Requirements
U.S., Canadian model sss-srrrrrssssererenseereseeseseeneen ses AC 120 Volts, 60 Hz
(SX-311R only)
Multi-voitage model + ~AC 110 V/120V - 127
{220 V/240 V (switchable), 50/60 Hz
Power Consumption
U.S., Canadian models
+ 250 W {UL}, 335 VA {CSA}
(SX-311R only)
Multi-voltage model 410 W
AC Outlet eres SWITCHED x 1: 100W MAX
Dimensions
SX3TIR ~ 420 (W) X 140 (H) X 289 (D} mm
16-9/16{W) X 5-1/2 (H) X 11-3/8(D) in
+ 420 (W) X 135 (H) X 289 (D} mm
16-1 '9/1 6(W) X 5-6/16 (H) X 11-3/8(D) in
5.8 kg (12 Ib 13 02)
$X-307
Weight (without package} -
Furnished Parts
FM Antenna
AM Loop Antenna
Operating Instructions
{8X31 18 only)
Remote control unit : 1
Dry cell battery isize "AAA" {RO3/UM-4}) 2
+ Measured pursuant to the Federal Trade Commission's Trade Regulation rule
on Power Output Claims for Amplifier
* Measured By Audio Spectrum Analyzer
NOTE:
Specifications and design subject to possible modification without notice due to
improvements.
15
<ARB1357 >
<SX-251R, SX-201>
Amplifier Section
Continuous Average Power Output is 50 watts* per chan-
nel, min., at 8 ohms from 40 Hertz to 26,000 Hertz with
no more then 0.8% total harmonic distortion.**
Continuous Power Output (both channet driven)"
40 Hz / 20 kHz, T.H.D. 0.8%, 8Q 5OW + 50W
Dynamic power output (with EIA test signal)
4/89 aoe 85 Wish W
e)
Input (Sensitvitylimpedan
PHONO tek
CD, VCR/LD, TAPE OAT. TAPE 2°
Phono Overload Level iT, H dD. 0.01%, 1 kHz)
2.5 mV/47 k&
160 mV/22 kQ
PHONO? i e s s i e t r e i s e rath or cecneptersvissetisese sits 130 mv
Output Level
TAPE REC 150 mV!2.2 ka
Frequency Response
PHONO {RIAA Equalization}
CD, VERILD. TAPE 1/DAT, TAPE 2
a 20 Hz to 20,000 Hz +0.5 dB
seve 70 Hz to 76,000 Hz 133 dB
Signal-to-Noise Ratio AH, short circuited, A network)
PHONO — =
CD, VCR/LD, TAPE 1/DAT, TAPE 2
Graphic Equalizer frequency band
72 dB
: 96 dB
+ 100 Hz, 330 Hz, 1 kHz,
3.3 kHz, 10 kHz, £8 dB
FM Tuner Section
Frequency range -
Usable Sensitivity
50 dB Quieting Sensitivity
MONO
STEREO
Signal-to-Noise Ratio
MONO snes
a 87.5 MHz to 108 MHz
+ 12.3 ABE, IHF (1.7 wV/75 Qi
16.8 dBi 1.6 pV/75 Q)
38.6 dBt (19.6 2V/75 Q)
* 73 dB (at 86 dBF)
STEREO ss-ssersenteedees 70 dB fat BS dBf)
Distortion
STEREO) .-:+12+8++-5+« ee 0.3% (1 kHz)
Alternate Channel Selectivity 50 dB (400 kHz)
Stereo Separation G + 35 dB (1 kHz)
Frequency Response
Antenna Input =
30 He to 15 KHz (xk 1 dB)
300 @ balanced, 75 Q unbalanced
AM Tuner Section
Frequency range
When 10 kHz step 530 kHz to 1,700 kHz
(SX-201 only}
When 9 kHz step - $31 kHz to 1,602 KHz
Sensitivity
IHF, Loop 'antenna, 350 win
Selectivity f 20dB
Signal-to-Noise Ratio 50 dB
Antenna -
» AM Loop Antenna
Miscellaneous
Power Requirements
U.S., Canadian models
(SX-201 only)
Multi-voltage model verre trees AC UNO VIT2Z0V ~ 127 V
/220 Vi240 V (switchable), 60/60 Hz
AC 120 Volts, 60 Hz
Power Consumption
U.S., Canadian models «0 190 W (UL). 240 VA (CSA)
{SX-201 only)
Multi-voltage model 290 W
AC Outlet SWITCHED x 1: 1OOW MAX
Dimensions 420 (W) X 135 (H) X 289 (D) mm
18-9) 161W) X 8-5/16 (4) X 11-3/8(D) in
Weight (without package) 5.3 kg (11 tb 11 o2)
Furnished Parts
FM Antenna seteseceseeseees i }
AM Loop Antenna : 1
Operating Instructions 1
(SX-251R onty)
Remote control unit i 1
Dry cell battery {size "AAA" (RO3/UM-4)) . 2
* Measured pursuant to the Federal Trade Commission's Trade Regulation rule
on Power Output Claims for Amplifier.
** Measured By Audio Spectrum Analyzer.
NOTE:
Specifications and design subject to possible modification without notice due to
improvements.