Table of Contents
Advertisement
Model 5308A
Installation
SECTION
IX H
5308A 75 MHz TIMER/COUNTER
SUBSECTION
Il
INSTALLATION
9H-2-1.
INTRODUCTION
9H-2-2.
This section contains information on unpack-
ing and inspection, storage and shipment, installation
and removal of plug-on, and portable operation.
9H-2-3.
UNPACKING AND INSPECTION
9H-2-4.
If the shipping carton is damaged, ask that
the carrier's agent be present when the instrument is
unpacked.
Inpsect the instrument for damage such as
scratches, dents, broken knobs, etc. If the instrument
is damaged
or fails to meet performance tests when
used with the 5300B
mainframe,
notify the carrier
and the nearest Hewlett-Packard
Sales and Service
Office immediately.
Performance
check procedures
are located in Subsection V, and Sales and Service
Offices are listed in Section VI of the 5300B portion of
the manual.
Retain the shipping carton and the pad-
ding material for the carrier's inspection.
The Sales
and Service Office will arrange for the repair or re-
placement of the instrument without waiting for the
claim against the carrier to be settled.
9H-2-5.
STORAGE AND SHIPMENT
9H-2-6.
PACKAGING.
To protect valuable elec-
tronic equipment during storage or shipment, always
use
the best packaging
methods
available.
Your
Hewlett-Packard
Sales and Service Office can pro-
vide packaging material such as that used for original
factory packaging.
Contract packaging
companies
in many
cities can provide dependable custom pack-
aging on short notice.
The unit was originally pack-
aged as follows:
The original container is a corrugated cardboard
box with 200 Ibs. burst test (HP 9211-1620).
The
instrument is secured and protected in the box by
a top and bottom
molded
frame
of polystyrene
foam (HP No. 9220-1545).
9H-2-7,
ENVIRONMENT.
Conditions during stor-
age
and
shipment
should
normally
be limited
as
follows:
a.
Maximum altitude:
25,000 feet.
b.
Minimum temperature:
-40°F (-40°C).
c.
Maximum temperature:
+167°F (+75°C).
9H-2-8.
INSTALLATION
AND REMOVAL
OF
PLUG-ON
9H-2-9.
The counter must be used with a 5300B main-
frame to make measurements.
Mate the counter and
the mainframe according to the instructions given in
Paragraph
2-11 and Figure 2-1 in the 5300B main-
frame documentation.
9H-2-10.
PORTABLE OPERATION
9H-2-11.
Use of the HP Model 5310A Battery Pack
enables the 5300B mainframe and the counter to be
used in areas removed from ac power sources.
The
battery pack provides a minimum
of 3 hours oper-
ation (typically 5 hours) at 20° to 30°C operating and
charging
temperature.
Tables
1-2 and
1-4 of the
5300B portion of the manual lists the battery pack as
an
available
accessory.
Documentation
for
the
battery pack is also included in Section IV through
VIII of the 5300B portion of the manual.
To prepare
the
5300B/5308A
for
portable
operation,
refer
to
Paragraph 2-13 and Figure 2-2, of the 5300B portion
of the manual.
9H-2-1
Advertisement
Table of Contents
