Download Print this page

Qlightec ST45ML-NEC Manual page 3

Increased safety explosion proof led tower lights

Advertisement

Wiring Instructions
• ST45ML-NEC can be wired by using both external contact and transistor.
• In case of wiring by transistor, please make sure if it is NPN type or PNP type. Please carefully follow wiring instruction below.
External Contact
1
Red
Amber
2
Blue
3
Steady
Green
Ground
connection
Fuse
Black
• External power line/ external signal line - LAPP UNITRONIC 300
• This product can be wired regardless of polarity.
Parts Definition/ Installation
Out Cover(AI)
Ex Globe(PC)
Lens(PC)
Housing(PC)
Flange nut
• First, remove the flange nuts from bolts and place the
product through the mounting surface holes.
• Fasten the flange nuts on the opposite side of the mounting
surface until the product is tightened securely.
Installation Environment and Protection Rating
This product is designed to be explosion proof.
Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.
For further information, please visit our website (www.qlight.com).
ST45ML-NEC-DC
Red
1
Layer1
Amber
2
Layer2
Blue
Layer3
3
Green
Power
Black
External transistor-NPN
1
Layer1
2
Layer2
Layer3
3
Steady
Ground
connection
Fuse
Power
Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
3-Ø5 HOLES
Ø20 HOLE
PCD 30
Grounding Instructions
M4 ground
contact part
3
External transistor-PNP
Red
Layer1
Amber
Layer2
Blue
Layer3
Green
Ground
connection
Fuse
Power
Black
• Please use an M4 bolt at the location
marked in the diagram above to ground
the product.
• When connecting the grounding cable,
please use a ring terminal.
• Please use a ring terminal made of C5212
material as it has the same electrical prop-
erties of the conductor.
• Please use a grounding cable with a
diameter greater than 4mm
2
.
• Internal grounding terminal shall be used
for the equipment grounding connection
and that the external terminal is for a
supplementary bonding connection
where local codes or authorities permit
Buzzer Sound VolumeAdjustment
Instructions or require such connection.

Advertisement

loading