How To Empty Water Tank - LG MD16GQSE0 Owner's Manual

How to empty water tank

Hold the top handle of the water tank and
softly take it out.
First insert the bottom part of the water tank
correctly into the hole, and then push it in.
The form of water container may differ in each product.
CAUTION
!
• If the water tank is taken out right after stopping the operation, there are cases of water re-
maining in the heat exchanger dropping into the main unit. (Wipe the dropped water with
soft cloth.)
• After taking out the water tank, do not touch inside the main unit. It will cause failure of the
full water detection device.
• Periodically clean inside the water tank (about 1 time per week).
• If it is used during winter or at low temperature, there is less moisture in the air, so dehu-
midification amount is also decreased.
• When you take out the water tank, make sure to stop the product. If you take out during op-
eration, the compressor will stop and the fan operates for 5 minutes to vaporize the re-
maining condensed water inside the heat exchanger before complete stop.
Open the drain lid of the water tank.
Drain lid
Water tank
handle
Pour out the water inside the water tank.
Water tank
handle
HOW TO USE 19
EN