Step 3 Cable Connections - NEC N8154-27 User Manual

Step 3 Cable Connections

【When installing in the T120b-E】
1.
Connect the SGPIO cable, power cables, and SAS/SATA cable (Option) coming with the cage
following the figure shown below.
-SGPIO cable
Use the SGPIO cable to connect the SGPIO connector (J1) on the back of the 3.5-inch disk cage to
the SGPIO A connector at the bottom of the motherboard.
-Power cable
Connect the server power cable P12 to the power connector on the back of the 3.5-inch disk cage
that is further away from you (CN2), and connect the server power cable P11 to the power connector
on the back of the 3.5-inch disk cage that is closer to you (CN1).
5