Table of Contents
Advertisement
02
/Safety Rules
Before operating FIFISH products, please be sure to receive relevant training and
take practices, and read this document thoroughly before performing underwater
operations. Operations in violation of QYSEA safety rules may result in the
consequence that your safety and interests cannot be guaranteed.
1.Unauthorized disassemble may cause the leakage problem, and damages on OPSS. Such type of safety issues
is not responded to QYSEA's legal liability. In addition, the warranty will not valid for unauthorized
disassembled products.
2.ROV shall be OFF before plug in power outlet.
3.Check the tether, connecters and seals after every dive.
4.The tether external surface shall contact well. If you find any damages, such as, scratches, peel off or split,
stop using damaged tether and contact your local authorized service center or dealer for repair or replacing.
5.All connectors shall be clean and dry in all time to avoid shortages, and corrosions.
6.All seals and O-rings shall be contact and clean in all time, otherwise, replace it ASAP.
7.Keep the OPSS-PM OFF when deploy and retrieve.
8.It is NOT recommended to use OPSS when diver is operating underwater.
9.Do NOT touching OPSS's tether and E-Tank underwater.
10.Monitoring the status indicator LED, the error color code index
11.No heavy objects left on OPSS-PM.
12.Do NOT put OPSS-PM inside water or wet floors, and avoid wave splashes.
05
Advertisement
Table of Contents
