Sony VO-5630 Operating Instructions Manual page 11

© VIDEO IN connector (BNC type)
Connect the video signal to be recorded to
this connector. IN to video
VIDEO output
a oo
0 0006)° a0
75-ohm coaxial cable
[BNC connector Pot a, Pons
sh)
Insert by engaging the slot with
the projection and tighten the
knurled locking ring clockwise.
| ee a ee
Video monitor, TV tuner unit
® DUB IN connector (7 pin)
When duplicating a tape using a player
with a dubbing connector, the video
signal is connected using this connec-
to dubbing output
>—______7-fi— |
VDC-5 Dubbing Cable
D Q o0
tor.
:
ly gua o) 09
Note on DUB connectors
Do not connect the dubbing connectors in parallel.
| we) DUB .
| @ DUB IN (maie) OUT (female) &)
Engage the siot
with the projection
and tighten the locking
ring clockwise.
DUB OUT
® AC IN connector
Connect the supplied ac power cord
here.
@ mr ground terminal
To reduce hum in the audio signal, con-
nect this terminal to a ground terminal
of the connected audio equipment.
to a ground terminal
=P
Stereo amplifier, etc.
ground wire
11