Advertisement
LD/CDV/CD
TO PLAY
ONLY
DESIRED
SCENES/TRACKS
- Program Playback
|
Selected chapters (LD) or tracks (CDV/CD) can be played in
any desired order (max. 24 chapters or tracks).
1. Press PGM.
Display with a disc containing a TOC
y 30.12
PLAY
f TOTAL TIME
PROGRAM
0 0.00
STEP- 1
2. Enter the track No. with the DIRECT MUSIC SEARCH
buttons on the front panel or with the digit buttons
on the remote control unit.
Example: To play CD tracks No. 9, No. 7, and No. 18
respectively.
After approx. 1 second
3 0.32
PLAY
TOTAL TIME
PROGRAM
3 8.30
STEP- 4
09
07
18>b--
--
--
<CLD-2750K only>
With two-sided LDs, first specify side Aor side B with DISC
SIDE A or B and then enter the number of the desired
chapter with the digit buttons.
Example: To program chapter 9 on side B, chapter 7 on
side A, and chapter 18 on side B, in that order.
URG-RARAVQ
Screen display after
programming is completed
3.0.12
APLAY
PROGRAM
STEP- 4
BO9 A07 B18>--
--
--
A pause between tracks/chapters can also be programmed
by pressing PAUSE it instead of the digit buttons.
If you make a mistake during entry:
Press CLEAR on the remote control unit and enter the
correct number with the digit buttons.
3. Press >/H or PLAY >.
PLAY/PAUSE
@ You can view the state of programming on the monitor
TV screen.
To check the program contents
During program playback or in stop mode, press PGM to
display the program contents on the monitor screen. When
PGMM is pressed again, the program contents disappear.
To modify the program contents
To delete or change a programmed chapter/track or pause:
1. Press PGM.
2. Press SKIP é<4 or Si to place the cursor (p) on the left
side of the chapter/track or pause to be changed.
. To delete it, press CLEAR. To replace it with another
chapter/track, enter the new chapter/track number with
the digit buttons.
Press PAUSE II to enter a pause.
. Press PGM to complete programming. Pressing » also
completes programming and starts program playback with
the new program contents.
Programmed chapter/track being played cannot be erased
or changed.
Programmed pause being engaged cannot be erased or
changed.
w
aS
To clear the program playback
Press CLEAR to return to normal playback.
To clear the program contents:
@ Open the disc table.
e Press CLEAR in stop mode.
NOTES:
e /f SCAN»
js held depressed during Program Playback,
the playback position will move to another chapter/track,
but when
is released, the next chapter/track in the
program
will be played. If <4
is held depressed,
the
playback position returns to the beginning of the current
chapter or track being played, but it will not go beyond it to
@ previous chapter or track in the program.
During program playback, SKIP 4-4 and 1
can be used
to skip the programmed chapters/tracks or pause.
21
<VRB1163>
En
Advertisement
