Storage Configuration - ASROCK 760GM User Manual

4.4.4 Storage Configuration

Storage Configuration
Onboard SATA Controller
SATA Operation Mode
SATA IDE Combined Mode
SATAII_1
SATAII_2
SATAII_3
SATAII_4
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard SATA Controller
Enable/disable the SATA controllers.
SATA Operation Mode
IDE: For better compatibility.
AHCI: Supports new features that improve performance.
RAID: Combine multiple disk drives into a logical unit.
If you set this item to RAID mode, it is suggested to install SATA ODD driver on
SATAII_3 and SATAII_4 port.
SATA IDE Combined Mode
This item is for SATA3_4 and SATA3_5 ports. Use this item to enable or disable
SATA IDE combined mode. The default value is [Enabled].
If you want to build RAID on SATAII_3 and SATAII_4 ports, please disable this item.
BIOS SETUP UTILITY
Advanced
[Enabled]
[AHCI]
[Enabled]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
Configure onboard
serial ATA
controller.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 Save and Exit
F10 Save and Exit
ESC ESC Exit Exit
760GM-HDV
43