Set-Up Features; Set Time; Ant (Antenna) - Panasonic CT-20G11 Operating Instructions Manual

Set-Up Features
• Set Time
• Ant (Antenna)
• Auto Prog (Program)
* Manual Prog (Program)
• CC (Closed Caption) on Mute
• CC (Closed Caption) Mode
• English, Espanol (Spanish) or Francais (French)
Located On Remote Control
Ant (Antenna)-
The proper Inputmode mustbe
selected for the type of signal at the antenna input.
• TV mode is usedwhen the Receiver is notconnected
to a cable TV system, for example when using a
VHF/UHF antenna (channels02 - 69).
• Cable mode is used when the Receiver is connected
to a Cable TV system and you are not using a cable
companyconverter box (channels 01 - 125).
1. PresstheACTION buttonto displaythe MainMenu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttonsto highlightthe Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
Seiscts Desired
FeaturaW'nen
Menu is Displayed
ACTION
Selects o rAdjusts _._
FeaturesWhen
Menu is Dis!:)la_d
Displaysand Exits Menus
Set Time
- Clock (when set) will displayon screen
at initial "rum On', after a channel change and when
pressingthe RECALL button.The time must be set first
in order to operate the Program ON/OFF Timer.
1. Prass the ACTION button todispls.y the MairtMenu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlightthe Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu, "SET TIME" wilt be highlighted.
4. Press the CH DOWN buttonto highlight"ANT.
5. Press the VOL LEFT or RIGHT buttonto selectTV
or CABLE.
6. Press the ACTION buttontwice to exit the Set-Up
Menu.
/
4. Press the VOL LEFT or RIGHT buttonto set hours
(set AM/PM accordingly).
5. Press the CH DOWN button to select minutes
position.
6. Pressthe VOL LEFT or RIGHT buttonrepeetedly to
set minutes.
7. Press the ACTION button twice to exit the Set-Up
Menu.
-18-