Channel Caption - Panasonic CT-20G11 Operating Instructions Manual

Channel Caption
Located On Remote Control
aGkJcts O6=,_ _=,a
FeatureWhen
Menu is Displayed
ACTION
Selectso¢ Adjusts (_£)
FeaturesWhen
Menu isDisplayed
Displays and Exits Menus
This feature allowsyou to enter the call names of up to
30 stations into memory (using up to 4 characters for
each station). The call name willthen displayalong with
the channel number when changing channels or
pressingRECALL.
I
CH03 ,,__Charmel Captio_
xYYz
Sta_k_lden_m)
1. Press theACTION buttonto displaythe Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttonsto highlightthe Channel Caption Icon.
3. Press the ACTION buttonto select and displaythe
Channel CaptionMenu.
Helpful Hints: ]
When the Maximum amount of station identifiersare I
entered, =FULL" will be displayed in the caption I
position. I
4. Press the VOL LEFT or RIGHT button,or use the
Remote Control Keyboard (0-9), to enter the
channel number you wish to assign a Station
Identifier.
5. Press the CH DOWN button to highlight"ENTER
CAPTION'.
6. Press the VOL LEFT or RIGHT buttonto selectfirst
character in Station Identifier.Then press the CH
DOWN buttonto movecursortothe secondposition
and repeat until the complete Station Identifier is
entered (up to 4 charactem).
7. Press the CH UP or DOWN button to highlight
"ENTER CHANNEL NUMBER'. Then repeat steps
4 through 6 to continue adding Channel Station
Identifier(s).
8. Press the ACTION button twiceto exRthe Channel
Caption Menu.
NOTE: To delete a Channel Caption (Station Identifier)
from memory all four character positionsin the
"ENTER CAPTION" area must display a dash
mark (-).
-16-