Switching The Appliance On; Setting The Temperature - Bosch GSV29VW30 Instructions For Use Manual

en
Controls
Fig. "
1
On/Off button
Serves to switch the whole
appliance on and off.
2
Temperature display
Indicates the set temperature of
the freezer compartment.
3
Display super freezing
Illuminates when super freezing is
on.
4
Temperature selection button
The required temperature is set
with this button.
Switching the
appliance on
Fig. "
Switch on the appliance with the
On/Off button 1.
A warning signal sounds. Temperature
display 2 is flashing.
Press the temperature setting button 4.
The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 2 is lit.
We recommend a factory setting of
-18 °C in the freezer compartment.
28
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting the
temperature
Fig. "
Freezer
The temperature can be set from
-16 °C to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 2.