Advertisement
Quick Links
Advertisement
Related Manuals for Lenkeng LKV104WV
Summary of Contents for Lenkeng LKV104WV
- Page 1 H22003英文说明书 : 0106010022067 材质:157g铜版纸 尺寸：100x138mm 装订方式：骑马钉...
- Page 2 User Manual 2x2 VIDEO WALL CONTROLLER Disclaimer The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.
-
Page 3: Important Safety Instructions
· Important Safety Instructions 1. To prevent electric shock, please ensure that all devices are properly grounded. 2. Do not place this device near or over a radiator or heat register, or where it is exposed to direct sunlight. 3. Do not expose this device to rain or place it near water. Any liquid that goes into the device may cause a failure, fire, or electric shock. -
Page 4: Package Contents
6. Support 3.5mm left/right channel audio output. 7. Supports 180-degree rotation of HDMI1/2 display image in 2x2 mode (when the upper displays installed upside down). 8. Firmware upgrading via micro USB port. ⑥ ⑦ ⑧ ⑨ ⑩ 9. Lightning protection, surge protection, ESD protection. 10. -
Page 5: Installation Procedures
· Installation Procedures 3. RS-232 control Insert the terminal into the controller and connect it to external equipment. 1. Connection Diagrams The three pins are GND/RXD/TXD, and the splicing mode can be set by RS-232 instruction. The default is as follows: Baud rate: 9600 HDMI output 2 Date bits: 8... - Page 6 ES201\n to realize 180-degree rotation of HDMI1/HDMI2 display image , Received successfully ES 04 On OK Return value and then enter the control command ES 200\n to resume; Received unsuccessful ES 04 On FAIL ② When the dip switch is in position "111", enter the control command ES Control command 2 ES All Off\n 110\n to switch to 2x2 mode, then input the control command ES 201\n...
- Page 7 4. DIP Switch Built-in 8 splicing mode can be switched by dip switch. dip switch means ‘1’ up, dip switch means ‘0’down, and the default is ‘000’. horizontally HDMI Out 4 = HDMI Out 3 Dip switch state Splicing mode vertically vertically vertically...
- Page 8 · FAQ · Specification Q: Picture quality is not fluent and stable? Items Description A：1) Please check and make sure all HDMI cables are connected well. HDMI Input 1x HDMI 2) Try to connect the source device to display device directly, or change HDMI Output 4x HDMI to another source device for a try to see the picture quality.
- Page 9 Color Black Physical Properties Dimensions 160(L)*90(W)*20.6(H)mm ESD protection 1a Contact discharge level 2 (±4KV) 1b Air discharge level 3 (±8KV) Protection Implementation of the standard: IEC61000-4-2 Lightning protection, Surge protection...