System Stand - Lenovo IdeaCentre AIO 5 24IMB05 Hardware Maintenance Manual

6. Install the new DC-in board.
7. Secure the DC-in board with the screws.
8. Reconnect the cable connectors to the DC-in board.
9. Reinstall the removed parts.

System stand

Prerequisite
Before you start, read Chapter 2 "Important service information" on page 27 and print the following
instructions.
Replacement procedure
1. Remove the hinge cover. See "Hinge cover" on page 57.
2. Remove the computer upper cover. See "Computer upper cover" on page 104.
118
IdeaCentre AIO 5 24IMB05 Hardware Maintenance Manual