Table of Contents
Advertisement
you want to avoid or cancel the
cooling process, open the door.
→ "Display", Page 20
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start Reload .
5.
12.6 Cancelling the pro-
gramme
Press Start Reload .
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 29
12.7 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.8 Switching off the appli-
ance
Turn the programme selector to
▶
.
12.9 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
The display shows the following
¡
after drying: "End"
or the display shows the following
¡
during operation:
Open the door.
1.
Remove the fluff from the door.
2.
Remove the fluff filter.
3.
Remove the fluff from the recess.
4.
Ensure that no fluff falls into the air
channel.
operation en
.
29
Advertisement
Table of Contents
